90
[5] GASKETS
Specifications
Natural Rubber Gaskets
AAP stocks gaskets that are made from commercial grade natural rubber with cotton reinforcement that are intended for
general purpose applications
Chemical Resistance
Basic Properties
Weathering and Ozone
Fair
Specific Gravity
1.55 g/cm_
Abrasion
Fair
Hardness
70 Shore A
Acids
Poor
Tensile
3500 kPa
Caustics/ Alkalies
Good
Elongation
300%
Oils and Petroleum Products
Poor
MAX Temperature
65°C
Organic Solvents
Not Recommended
Applications - Air, Water, Low pressure steam
Fibre Gaskets
AAP supplies compressed fibre gaskets made from Aramid fibres, bonded with Nitrile Rubber (NBR). It is manufactured by
means of a hot calender process under rigorous quality control standards which are registered under ISO 9001 certification.
Working Conditions
Peak Temperature
+ 400°C
Constant Temperature
+ 240°C
Peak Pressure
up to 11000 kPa
Constant Working Pressure
5000 kPa
Applications - Air, Water, low pressure steam, petroleum derivatives, oil, gas and general chemical products
Non-Reinforced Rubber Gaskets
AAP also stocks a multi-purpose premium grade rubber gasket that has very good resistance to petroleum based fluids. The
sheeting contains 100% NBR polymer content
Chemical Resistance
Basic Properties
Weathering and Ozone
Fair
Specific Gravity
1.27 g/cm_
Abrasion
Good
Hardness
70 Shore A
Acids
Poor
Tensile
13000 kPa
Caustics/ Alkalies
Good
Elongation
400%
Oils and Petroleum Products
Excellent
Temperature
90°C
Organic Solvents
Not Recommended
Applications - Petroleum based fluids, Mineral Oils and Hydraulic Fluids
Spiral Wound Gaskets
Spiral Wound Gaskets are made of a preformed metallic strip and a softer filler material, wound together under pressure, and
optionally with an outer guide ring. The metal strip holds the filler, resulting in excellent mechanical resistance, resilience and
recovery. The maximum working temperature is 450°C due to Graphite being used as the filler material.
1 3,4,5,6,7